PROFILES GRP – RPT

Profiles are produced by continuous pultrusion process, which allows elaborating profiles of plastics reinforced with continuous threads of fiberglass. These mats absorb charges and longitudinal forces, able to support high tensions. GRP profiles have a polyester matrix reinforced with fiberglass fabrics up to 65%; therefore, they offer a great versatility in construction of platforms, walkways and stairs. The application of the profiles gets a great importance in works with big dimensions where quality, weight and resistance are the key. The GRP profile gratings are based according to the beams in the load direction joint by bars and distant tubes, fixed with specific adhesives and with no torsion problems.

 CARACTERÍSTICAS

PERFIL
DIMENSION ( mm)
ANGLE
60x60x6; 80x80x6;
45x35x8; 60x40x6;
80x45x6
U PROFILES
38x20x3; 50x30x4;
100x50x6
PIPE
60x20x3; 120x60x5
SQUARE TUBE
50x50x4; 60x60x4
SOLID ROUND TUBE
12×8; 30×20
H PROFILES
150x75x8; 200x100x10
T PROFILES
40x40x5; 80x80x5

PLASTIC FEET

PP feet with UV treatment are the solution to different level floors, fixing the grating with security and accuracy. 

EXPANSION JOINTS

They are made by wet moulding and hot curing, based on epoxy resin and fiberglass. They are a high performing solution in projects with high technical requirements. 

INOX FIXATION SETS

These sets allow the fixation of the gratings to the supporting structure; they are a safe and practical fixation option.

SUPPORTS

Options in INOX or galvanized.